Do You Need a Permit for That? A Plain-English Guide for Seattle-Area Homeowners
“We don't really need a permit for that” is one of the most expensive sentences in home improvement. Sometimes it's true. Often it isn't, and the bill shows up years later when you go to sell.
Here's a plain-English look at what typically needs a permit in the Seattle area. One caveat up front: every city sets its own rules. Seattle, Renton, Bellevue, Kirkland and Issaquah each have their own permit office and their own thresholds, so always confirm with your city before you start.
Work that usually doesn't need a building permit
Using Seattle's rules as an example, these generally don't need a building permit:
- Painting, wallpaper and other surface finishes
- Installing kitchen cabinets
- Patios and concrete slabs on the ground
- Small, like-for-like repairs of worn-out parts
- Minor repairs that total $6,000 or less in any six-month period
Even when a building permit isn't required, electrical and plumbing work often needs its own permit. Swapping a faucet is one thing. Adding a circuit or moving a drain is another.
Work that almost always needs a permit
- Anything structural. Removing or changing a load-bearing wall, beam or post.
- Changes to the building envelope. New windows or doors in new openings, additions, and most re-siding projects that change the wall assembly.
- Moving plumbing, gas or electrical. New circuits, relocated drains, a new gas line to the range.
- Raised decks. In Seattle, decks 18 inches or more above grade need a permit. Other cities use different heights, so check yours.
- Anything that affects egress, light, ventilation or fire safety. Turning a basement room into a bedroom is a common example.
- Additions and ADUs. Always.
Why permits are worth the hassle
A permit means an inspector looked at the work before it was covered up. That protects you, your family and the next owner. It also protects your sale. Buyers' inspectors and appraisers ask about unpermitted work, and it can delay a closing, lower your price, or leave you paying to open walls back up.
Your insurer may also ask whether work was permitted after a claim. You don't want that conversation to go badly.
Who pulls the permit?
When you hire a contractor, they should handle it. Pulling permits, scheduling inspections and dealing with plan reviewers is part of the job. If a contractor asks you to pull the permit yourself as the homeowner, ask why. It can shift responsibility for code compliance onto you.
How long permits take
It depends on the city and the project. Simple trade permits can be quick. Structural changes, additions and ADUs can take weeks to months of review. Build that into your timeline, and order long-lead materials while you wait.
We handle permits on every project we build. You can read more about how that fits into the schedule on our How We Work page.
Frequently asked questions
What happens if I remodel without a permit?
You may have to pay for permits after the fact, open finished walls for inspection, or fix work that doesn't meet code. Unpermitted work can also delay or reduce your sale.
Do I need a permit to replace windows?
Replacing a window in the same opening is often treated differently than cutting a new or larger opening, which changes the structure and the building envelope. Check your city's rules before you order.
Who is responsible for getting the permit?
Usually your contractor. If you pull the permit yourself as the homeowner, you may take on responsibility for the work meeting code.
Want a straight answer on your project? Book a free consultation or call (425) 922-4415. We’ll tell you what it’ll take, and if it doesn’t make sense, we’ll say so.